Table of Contents

Twilio

...

Table of Contents

...

Twilio

Twilio is used to send text messages to your customers. You will use this to manage your company's SMS numbers.

Configuring Twilio

Logon to Twilio. You will come to the default dashboard page
Click the ellipsis under the house icon on the left-hand side
Under Super Network, go to phone numbers > manage numbers > active numbers. This will display all of the numbers your company can send SMS from. This is essentially an IP for an email.
Select a number

...

5. Scroll down to Messaging. Messaging automation needs to be set up in order to for SignupApp to get the information.

Under Messaging complete the following fields:

...

CONFIGURE WITH

Select Webhooks, TwiML Bins, Functions, Studio, or Proxy

A MESSAGE COMES IN

Select Webhook, then, copy and paste the URL below.

Note

Please be sure to copy the entire link.

Best practice: right-click and select Copy Link Address.

https://twilio:Hs3JGbJv@twilio-route-14west-spine-webhook-publisher-prod.apps.c3.balt.ocp.14west.io/camel/ingest/twilio#ct=10000&rt=15000&rc=3&rp=5xx,ct,rt&e=ashburn,umatilla

6. Click Save

...

Gathering Info for SUA and Blueshift

Gather the following information from Twilio for inputs in SUA and Blueshift.

Required information for SUA to talk to Twilio:

...

Phone Number	Click the ellipsis under the house icon on the left hand side. Under Super Network, go to phone number > manage numbers > active numbers. Make note of the phone number that will be used.
Account SID	Located on the main dashboard page in Twilio
Auth Token	Located on the main dashboard page in Twilio

...

Info
You won’t be setting up the adapters in Blueshift but you will need to provide the below information via a ticket to get it set up.

Phone Number	Click to ellipsis under house icon on left hand side. Under Super Network, go to phone numbers > manage numbers > active numbers. Make note of the phone number that will be used.
API Key SID	Located under settings in Twilio
API Secret	This pops up when you create an API key. You will need to copy it save it then or else it will be lost.
Account SID	Located on the main dashboard page in Twilio
Auth Token	Located on the main dashboard page in Twilio

...

Blacklisting and Validation

You will need to coordinate the following with Twilio.

Blacklisting

You will need to coordinate with our Twilio rep, Dominique Kaittinat <dkiattinat@twilio.com> on the handling of your own opt-in/opt-outs.

This needs to be setup correctly/requested appropriately on the application. "Correctly" in this instance means the blacklisting feature is NOT being utilized. SUA is handling the opt-ins/outs, not Twilio.

Validation

You will need to add free Twilio validation service to the forms for your phone numbers to ensure the customer is added to correct list. This will ensure no international customers sign up to domestic lists.

The following documentation from Twilio will help you set this up, but feel free to engage Dominique for direction first.

...

SignupApp

Next, you will need to set up the Twilio information in SignupApp. SignupApp is used as the scaffolding or the structure that is going to handle the lifecycle of people that get signed up for SMS campaigns. SignupApp will also manage the opt-ins for SMS signups.

SMS Code Setup

Log in to SignupApp
Select SMS lists at the top of the page then click on SMS CODE SETUP.
Click + sign in the lower right-hand corner of the screen to set up a new SMS code.
Complete the following fields:

...

This will

Twilio Sender ID (Optional - for SHORT or LONG code)

SMS Provider

Select Twilio

Twilio Account Token

(Called "Auth Token" in Twilio)

Varies, copy and paste from the Auth Token field in Twilio. This will be found of the main dashboard.

To copy, select Show, then select and copy the token.

Twilio SID

(Called "Account SID" in Twilio)

Varies, copy and paste from the Account SID field in Twilio. This will be found on the main dashboard.

Code Type

Select Long for full length phone numbers and Short for short codes.

SMS Code

Varies, copy and paste from the Phone number field in Twilio.

Basic Default Messaging Keywords:

These messages will be sent as replies when the corresponding keyword is sent to the phone number.

These default messages can by overridden, but all verbiage (including default messages) must be approved by legal before go-live.

Save

A message will be sent instructing the customer to contact customer service.

Help

This message provides the customer with instructions on unsubscribing when they request help.

Info

This message will be sent to the customer when they request more info. They will be sent a link to the terms and conditions.

Unsubscribe

Confirmation customer will receive when successfully unsubscribed.

Info

Only used to send outbound SMS messages, and customers cannot send an SMS in response. As a consequence, all SMS messages sent from this code and associated lists must mention the short or long code in the SMS Code box above for the customer to respond STOP to, otherwise they cannot unsubscribe, which is a legal requirement. Additionally, a customer service phone number may be added to each message to handle unsubscribes as well

Basic Default Messaging Keywords:

These messages will be sent as replies when the corresponding keyword is sent to the phone number.

These default messages can by overridden, but all verbiage (including default messages) must be approved by legal before go-live.

Save

A message will be sent instructing the customer to contact customer service.

Help

This message provides the customer with instructions on unsubscribing when they request help.

Info

This message will be sent to the customer when they request more info. They will be sent a link to the terms and conditions.

Unsubscribe

Confirmation customer will receive when successfully unsubscribed.

Info
This will stop all message that come from this number. NOT just from a specific list.

Fallback

"Fallback" is used as a catchall and will be sent when SignupApp doesn't understand the request.

...

Info
If a list code is not associated with an SMS code then it can be deleted

...

SMS List Keywords

To navigate to this section go to SMS lists > SMS list keywords

...

If a customer texts OFFER to the short code then they will receive the reply message that is set.

...

SMS List Members

To navigate to this section go to SMS lists > SMS list members

...

To the far right of a record there is a button that allows you to unsubscribe the customer from the SMS list

...

Creating a

...

Free SMS List

Navigate to SMS LISTS.
Click + sign in the lower right-hand corner of the screen to set up a new Paid Free SMS List.
Complete the following fields:

...

List Code

Enter a list code for identification purposes. Customers will be required to include this list code in their text responses. The SMS codes (phone numbers) are most likely going to be used for multiple list. This will identify which list the customer is contacting us about. (Opt in, unsubscribes, etc)

This is a free form field.

List Description

Enter a descripiton of the list here.

List Channel

This will default to SMS.

List Type

The list type of Paid Free should be selected.

SMS Code

Select the phone number (SMS code) set up previously.

Item Number

Enter the paid free list that this phone number will be supporting. This field is required for profile validation and is helpful when creating segments in Blueshift.

If the item number is not added or is added incorrectly, it could be added to the wrong customer number and email pair.

Info
SUA does not currently check the contents of this field for a vaild item number. Please be mindful of typos.

Default Messages

These messages are specific to the individual list (rather than the phone number which might have multiple lists attached) and will be sent when a reply from the customer is required and/or when a reply from the customer is received.

Update all of the placeholders within the default messages. All messages must include the list code.

These default messages can be overridden, but all verbiage (including default messages) must be approved by legal before go-live.

Opt In

Customers will be required to confirm or opt in to their subscription. They will be reqired to reply with "COMFIRM" followed by the list code.

(Example: COMFIRM XYZSMS)

There is no time limit to opt in, but failure to do so or failure to do so correctly will prevent the signup process from completing.

If a customer attempts to signup again in the interim, the original signup and opt in will be replaced by the new one. If they have already opted in to the original signup, nothing will happen with the new signup.

Customers will not exist in Blueshift until they opt in.

Unsubscribe

Comfirmation customer will receive when successfully unsubscribed.

Info
This will stop messsages from the specific list.

Welcome

Welcome message sent to a customer when they submit a signup. This message include various instructions including confirming a signup/opting in.

Instructions to unsubscribe, get info, and get help are also included.

If a customer is requesting to unsubscribe and replies STOP without a list following, they customer will be unsubscribed from all lists attached to that phone number instead this specific list.

Info

This message will be sent to the customer when they request more info. They will be sent a link to the terms and conditions.

Help

This message will be sent to the customer when they request help. The message includes information on how to unsubscribe, as well as customer service contact info.

...

Info
An affiliate admin has the ability to delete a list. When this occurs every customer on the list will be unsubscribed.

...

Rest Calls

You will need to set up the WordPress plugin for your website rest calls in SignupApp in order for your website to be able to talk to SignupApp. This plugin setup requires a token from SignupAppThese rest calls will check to see if a user is already on an SMS list. Follow the instructions below to complete this setup.

1. Log into

...

Select 'Middleware 2' along the left-hand side

SignupApp

Info
You will need to have a Middleware plug-in set up for this to work. Make sure they are on the latest version of the plug-in so that the SUA integration is available. If it's not there then you will need to talk to threefold and upgrade to the latest version

3. Go to the integrations tab

4. Set up the Signup App Integration in the 'Sign Up App 2 Production Settings' section

5. Enter in Affiliate admin token from SUA.

To find the token:

...

6. Log into SignupApp

Info
You must be an affiliate admin in order to have access to the user token.

7. To locate the user token, navigate to the USERS tab

8. Locate yourself

9. Click on the Update User icon

10. Click on the Token tab

11. Click Reveal Token

12. Select and copy the token

13. Back in WordPress, enter the SUA URL for the production URL. (Use their SUA UAT URL for 'UAT URL, if needed)

14. Design your webpages

Info
Site page has to be behind a login

15. Use SMS shortcode provided by Threefold

16. Replace the list code placeholder with your list code.

Code Block

language	none

[agora_signupapp2_sms listcode="{list_code}" validate="true" subscribe_check="true"]

Info
This code is not the same as the phone number 'shortcode' we have been referencing for SMS. This is a predefined snippet of PHP that can be reused throughout your website. This code is universal across clients with the exception of the list code which you will need to fill in.must be an affiliate admin in order to have access to the user token.

2. To locate the user token, navigate to the USERS tab

3. Locate yourself

4. Click on the Update User icon

5. Click on the Token tab

6. Click Reveal Token

7. Select and copy the token

13. Below is the information needed to make the rest calls.

Authentication Value

header x-auth-token:{signupApp user token}

Rest call to check to see if a users is already on an SMS list

Code Block
https://signupapp2.com/signupapp/v1/lists/members?listCode={:listCode}&phoneNumber={:phoneNumber}

Rest call to subscribe a user to free SMS

Code Block

[post]https://signupapp2.com/signupapp/v1/lists/members
{
  "phoneNumber": "491719392833", --required 14 numaric must have country code appended
  "listCode": "PPC", --required
  "firstName": "fname", --limit 50 char
  "lastName": "lname", --limit 50 char
  "emailAddress": "email", --limit 255 char
  "sourceUrl": "http://someplace", -- whatever you want
  "listMemberIp": "123.123.123.123", --char 20
  "consentText": "legal stuff" -- whatever you want
}

...

Signup Errors

When an error occurs during sign-up, you will need to know why the opt-in failed. These error statuses will appear on the dashboard in Twilio and will define why the customer didn’t make it on the list. Iframesrc

https://www.twilio.com/docs/sms/api/message-resource#delivery-related-errorswidth

...

Blueshift

...

https://www.twilio.com/docs/sms/api/message-resource#delivery-related-errors

...

Note
Tagging needs to be enabled in Blueshift in order to safely utilize marketing SMS.

Next, you will need to set up the content, campaigns, and connection to Twilio in Blueshift. Blueshift is used to create SMS content and target subscribers. The content will then be sent from Blueshift and out through Twilio.

Creatives

SMS creatives aren't much different than Email creatives in Blueshift. Follow the instructions below to create an SMS creative.

...

11. Send a test text by entering the phone number you want receive the test and click Send.

...

Segments

Navigate to segments.
Click +SEGMENT.
Enter a name for the segment.
Click + to add a condition.
Make the following selections:

...

Transaction is:

sms_list

With the following attributes:

Info
This is just an example of a simple segment

unsubscribed_sms | is equal to | False

AND

sms_list_code | is equal to | [enter the list name from SUA here]

Note
The SMS transaction MUST must NOT be stared (do not click on the star) in order for the right phone number to be picked up for sending.

Info
Customers will not exist in Blueshift until they have confirmed their SMS subscription If a customer texts stop to unsubscribe, they will stay in Blueshift, but are set to inactive

...

Campaigns

SMS campaigns are the basically same as email campaigns with one main difference: Instead of selecting email, you will select SMS.

...

Versions Compared

Old Version 1

New Version Current

Key

Twilio

Twilio

Configuring Twilio

Gathering Info for SUA and Blueshift

Blacklisting and Validation

SignupApp

SMS Code Setup

SMS List Keywords

SMS List Members

Creating a

Free SMS List

Rest Calls

Signup Errors

Blueshift

Creatives

Segments

Campaigns

Page Comparison

Versions Compared

Old Version 1

New Version Current

Key

Twilio

Twilio

Configuring Twilio

Gathering Info for SUA and Blueshift

Blacklisting and Validation

SignupApp

SMS Code Setup

SMS List Keywords

SMS List Members

Creating a

Free SMS List

Rest Calls

Signup Errors

Blueshift

Creatives

Segments

Campaigns